HVLS Fans in Ahmedabad: A Practical Cooling Solution for Factories & Warehouses

HVLS Fans in Ahmedabad: A Practical Cooling Solution for Factories & Warehouses

Share Post

HVLS fans in Ahmedabad help factories and warehouses stay cooler by moving a large volume of air across the full floor with one slow, large ceiling fan. They suit tall industrial sheds in areas like Changodar, Sanand, Naroda and Vatva. They use far less power than air conditioning and replace dozens of small fans. KRISSVENT manufactures HVLS fans in Ahmedabad from 8 ft to 24 ft.

Summer in Ahmedabad is tough on industrial buildings. From April to June, outside temperatures often cross 40°C. Metal roof sheds soak up that heat all day and release it inside long after sunset. Workers slow down, machines run hotter, and stored goods can suffer.

Most units try pedestal fans first. They cool one spot, leave the rest of the floor stuffy and fill the aisles with cables. Air conditioning a full shed is rarely practical on cost.

This is where an HVLS fan makes sense.

Why Do Factories and Warehouses in Ahmedabad Get So Hot?

Industrial buildings in Ahmedabad trap heat for three main reasons:

  • Metal roof sheets absorb sunlight and turn the roof into a heater
  • Tall, wide sheds let hot air collect near the roof with little movement below
  • Machines, motors and lighting add their own heat to the floor

The city’s climate adds to it. Dry heat dominates from March to June. Humid, sticky air follows from July to September. A cooling plan for Ahmedabad needs to handle both.

What Is an HVLS Fan?

An HVLS (High Volume Low Speed) fan is a large industrial ceiling fan, usually 8 to 24 ft wide, that turns slowly and pushes a big column of air down to the floor. The air then spreads sideways across the building and creates a steady breeze.

That breeze helps sweat evaporate from the skin, so workers feel noticeably cooler even when the air temperature stays the same. One HVLS fan can cover an area that would otherwise need many small fans.

HVLS Fan vs Other Cooling Options for Ahmedabad Industries

Option Area Covered Power Use Best Suited For
HVLS fan Very large area per fan Low Full shed air movement
Pedestal or wall fans Small spot Low per fan, high in total Individual workstations
Industrial air cooler Medium to large zones Medium Dry heat months
Air conditioning Closed rooms Very high Small enclosed spaces

For most open factory and warehouse floors in Ahmedabad, an HVLS fan gives the widest comfort for the lowest running cost. Our guide on cooling a large warehouse without AC explains the options in detail.

Which Ahmedabad Industries Use HVLS Fans?

HVLS fans work in almost any large shed with enough ceiling height. In and around Ahmedabad, they are commonly used in:

  • Textile and garment units in Narol, Odhav and Vatva
  • Engineering and fabrication workshops in Naroda and Kathwada GIDC
  • Pharma and chemical plants around Changodar and Bavla
  • Auto component factories in Sanand and the surrounding belt
  • Warehouses and logistics hubs along Aslali, Changodar and the SP Ring Road
  • Plastic, packaging and food processing units across GIDC estates

What Size HVLS Fan Do You Need?

The right size depends on floor area, ceiling height, machine layout and racking. KRISSVENT offers these models:

KRISSVENT Model Fan Size Commonly Suited For
DX 2.4 E 8 ft Small workshops, low ceiling areas
DX 3.0 E 10 ft Compact production halls
DX 3.6 E 12 ft Medium workshops, packing areas
DX 5.0 / DX 5.0D 16 ft Factories with moderate floor area
DX 5.5 18 ft Larger production floors
DX 6.1 20 ft Big factories and warehouses
DX 7.3 / DX 7.3 M / DX 7.3 G E 24 ft Very large sheds and distribution centres

Get a quick estimate with the HVLS fan calculator, then confirm the final count after a site check.

How Is an HVLS Fan Planned Differently for a Factory and a Warehouse?

Point Factory Warehouse
Main goal Worker comfort near machines Air movement across aisles and stock
Fan position Over workstations and assembly lines Over aisles, clear of racking
Key obstacle Cranes, ducts, machine heat Tall racks, forklifts, lighting
Extra support Exhaust fans near heat sources Roof ventilators for trapped heat

Can HVLS Fans Work With Coolers and Exhaust Fans?

Yes, and in Ahmedabad this combination usually gives the best result.

  • March to June (dry heat): Pair HVLS fans with industrial air coolers. Coolers lower the air temperature, and the HVLS fan spreads that cooler air across the floor.
  • July to September (humid): Coolers become less effective. Use exhaust fans to remove moist air while the HVLS fan keeps it moving.
  • Metal roof sheds: Add solar roof ventilation fans to push out heat trapped under the sheets without extra power cost.

How Much Does an HVLS Fan Cost in Ahmedabad?

HVLS fan price in Ahmedabad depends on fan size, motor type, number of fans, mounting height and installation conditions. A single fan in a small workshop costs far less than a multi fan setup for a large warehouse.

The cost is usually recovered through lower power bills and fewer small fans to buy and maintain. For an exact price, share your shed size and ceiling height with KRISSVENT for a quote.

What Should You Check Before Installing an HVLS Fan in Your Shed?

  1. Floor length, width and clear ceiling height
  2. Roof structure and where the fan can be mounted safely
  3. Cranes, ducts, lights and sprinkler lines near the fan area
  4. Racking height in warehouses
  5. Location of heat producing machines
  6. Power supply available at the mounting point
  7. Speed control needs (a VFD in an HVLS fan lets you adjust speed by season)

KRISSVENT HVLS Fan Installations

KRISSVENT HVLS Fan Installations

See more completed projects in our gallery.

Why Choose KRISSVENT for HVLS Fans in Ahmedabad?

KRISSVENT is an HVLS fan manufacturer based in Ahmedabad, with its head office at Sun Central Place near Bopal Circle on SP Ring Road. Being local means:

  • Site visits across Ahmedabad and nearby industrial areas
  • Fan planning based on your actual shed layout, not just floor area
  • Installation and after sales support from a nearby team
  • One supplier for HVLS, exhaust, wall, mobile and solar roof fans and industrial coolers

We also serve clients across India through our Mumbai and Delhi NCR offices.

Get the Right HVLS Fan for Your Ahmedabad Factory or Warehouse

Share your shed size, ceiling height and photos of the space. Our team will suggest the right fan size, quantity and placement.

Visit: D 2010/2011, Sun Central Place, Nr Bopal Circle, SP Ring Road, Ambli, Ahmedabad 380059

FAQs

1. Who manufactures HVLS fans in Ahmedabad?

KRISSVENT is an HVLS fan manufacturer based in Ahmedabad, Gujarat. It offers fans from 8 ft to 24 ft for factories, warehouses and other large spaces.

2. Do HVLS fans actually reduce heat in Ahmedabad summers?

HVLS fans do not lower air temperature. They create a steady breeze that makes people feel several degrees cooler. For extra cooling in dry months, pair them with industrial air coolers.

3. What ceiling height is needed for an HVLS fan?

HVLS fans work best in tall industrial sheds. Smaller models suit lower ceilings, while 20 ft and 24 ft fans need more height. The exact requirement is confirmed during a site visit.

4. How many HVLS fans does a warehouse need?

The count depends on floor area, fan size, racking layout and ceiling height. Large open warehouses often need fewer big fans, while racked or divided spaces may need more.

5. Do HVLS fans use a lot of electricity?

No. One HVLS fan typically uses less power than the many pedestal fans it replaces, which makes it a low cost option for large sheds.

6. Can HVLS fans be installed in GIDC sheds with metal roofs?

Yes. Most GIDC sheds have metal roofs with steel structures. The fan is fixed to the main structure, not to the roof sheets.

7. How long does HVLS fan installation take?

Installation time depends on the number of fans, mounting height and site conditions. Single fan installations are usually quick, while multi fan projects are scheduled with the client.

Conclusion

For factories and warehouses in Ahmedabad, HVLS fans offer a simple way to beat the heat across the whole shed without the cost of air conditioning. The right fan size, careful placement and the correct mix of coolers and exhaust fans make all the difference. Talk to KRISSVENT for a site check and a fan plan built around your space.

Harpreet Ruprai
Harpreet Ruprai is the Founder of KRISSVENT and a Mechanical Engineer with 15+ years of experience in industrial ventilation and airflow solutions. An IIM Lucknow alumnus, he focuses on practical, performance-driven engineering insights backed by real-world applications.

HVLS Fan Products


Get Free Quote


Fill out the form and get your free quote

    This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

    Product Inquiry


    Fill out the form to get product inquiry

      This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

      Download Brochure


      Fill out the form and get your brochure

        This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.